Product Category
Infrared & Reversing Cameras for Trucks & Buses
Infrared and reversing cameras give a driver a clear view behind the vehicle day and night, from tight reversing into loading docks to low-light maneuvering. YUNTOR builds them with IR night vision, metal waterproof housings and USB or AHD output to match your monitor.
What is a infrared & reversing camera?
Infrared reversing cameras mount on the rear of a truck, trailer or bus to show the blind zone behind the vehicle, day and night. YUNTOR reversing cameras use IR night vision, metal waterproof housings and USB or AHD output, with backup-trigger wiring for automatic display.
Models in this category
Infrared reversing cameras (metal housing)
USB reversing cameras
Infrared reversing camera (wide-angle)
Waterproof infrared reversing camera
Infrared reversing cameras (metal housing)
USB reversing cameras
Infrared reversing camera (wide-angle)
Waterproof infrared reversing camera
Infrared reversing cameras (metal housing)
Addresses: blind zones, low-light visibility, compliance requirements
USB reversing cameras
Addresses: blind zones, low-light visibility, compliance requirements
Infrared reversing camera (wide-angle)
Addresses: blind zones, low-light visibility, compliance requirements
Waterproof infrared reversing camera
Addresses: blind zones, low-light visibility, compliance requirements
Compare Infrared & Reversing Cameras models
Select up to 4 models to focus the comparison — or view the full matrix below.
| Select to compare | Model | Resolution | Frame Rate | Lens | Interface | Voltage | Night Vision |
|---|---|---|---|---|---|---|---|
| X069 | 1280 × 720 | — | 4mm | AHD | 12V | IR | |
| X201 | 1.0M | 25 | 2.8mm | AHD | 12V ± 10% | IR | |
| X012 | 2.0M | 25 | 2.8mm | USB | 12V ± 10% | IR | |
| X070 | 2.0M | 25 | 2.8mm | USB | — | IR | |
| X068 | 2.0M | 30 | — | USB | — | IR | |
| X067 | — | — | — | AHD | 12V | IR |
Parameters verified from official spec sheets. A dash (—) marks a parameter not published in the datasheet — contact our engineer for the full datasheet.
How to choose infrared & reversing cameras
Match the output to your monitor
If your display has a USB reversing input, pick a USB model (X012, X070); otherwise choose an AHD model (X069, X201, X068, X067) for standard monitors and recorders.
Check the mounting position
Rear-mounted cameras suit reversing; trailer and high-mount positions need a wider or adjustable angle — confirm with our engineer.
Verify waterproofing for the environment
For outdoor, all-weather mounting, choose metal IP-rated housings such as X067; confirm the rating matches your operating environment.
Use IR for night operations
If your fleet runs at night or in tunnels, pick models with built-in IR LEDs for clear low-light reversing views.
Related industry solutions
-
Fleet Management
YUNTOR fleet management solutions combine 360° surround view, driver monitoring (DMS) and blind-spot detection (BSD) with 4G dual-channel recording — reducing accidents and giving logistics operators real-time visibility across long-haul fleets.
Explore Fleet Management → -
Commercial Vehicles
YUNTOR commercial vehicle solutions bring together the full product line — 360° AVM, DMS/ADAS, BSD cameras and 4G recorders — into configurable safety packages for general commercial fleets, direct from a source factory.
Explore Commercial Vehicles →
Infrared & Reversing Cameras — common questions
Can the camera see at night?
Yes. YUNTOR infrared reversing cameras use built-in IR LEDs for night vision, so the rear view stays clear in low-light and dark conditions.
Are the cameras waterproof?
Yes. Reversing cameras come in metal, IP-rated waterproof housings built for outdoor, all-weather mounting on trucks, trailers and buses.
Which output does my monitor need?
Choose AHD for analog monitors and recorders, or USB models (X012, X070) where the display already has a USB reversing input. Our engineer can confirm compatibility.
Compliance at a glance
Verified from official spec sheets across the Infrared & Reversing Cameras range.
- Night Vision IR
Need the full documentation for a specific model? Request the official certificate or test report from our engineer — verified documents, not marketing claims.
Technical Documentation Pack
Download the complete technical documentation package for the Infrared & Reversing Cameras range — datasheets, installation guides, wiring diagrams and compliance certificates in one ZIP.
Infrared & Reversing Cameras — Full Documentation Pack
- Product datasheets (PDF, all models)
- Installation & mounting guides
- Wiring diagrams & pinouts
- Compliance certificates (CE, E-Mark, IP ratings)
- Multi-language versions (EN/DE/ES/FR/RU)
Choose by engineering task
Find the right infrared & reversing cameras configuration
Engineers, fleet operators and procurement teams do not research the same way. Choose the route closest to your task and keep the technical context through to the RFQ.
Need a custom infrared & reversing cameras build?
Talk directly to our lead engineer for factory-direct pricing, custom specs and a prototype timeline.